Location: New York City, NY
Fabricators: Cody Builders Supply
Reference: SW21138
Structures Workshop collaborated closely with Cody Builders Supply to complete this stainless-steel shading structure. For more information on this project, check out Cody Builders Supply’s website and the photos and sketches below.
Location: Worcester, MA
Client/Architect: designLAB architects
EOR: Structures Workshop
“The Blackstone Visitor Center embraces the city’s forward-thinking agenda, seeking to reclaim a rich legacy tarnished by years of economic and environmental free fall.”
— Architectural Record, March 2019
Read about this project on our Blog: SW News-- Blackstone Visitor Center
Want to hear it from the architect? Check out designLAB’s page
Location: Jamestown, RI
Architect: Burgin Lambert Architects
EOR: Structures Workshop
Reference: SW20249
Location: Providence, RI
Client/Architect: Jack Ryan Architect, LLC
EOR: Structures Workshop
Reference: SW19246
Post construction photos courtesy of Jack Ryan Architect.
The planning stage: photo of the building post renovation and a sketch and a rendering of the building.
Location: Providence, RI
Client/Architect: Studio MLA
EOR: Structures Workshop
Reference: SW19058
Our 4,700-square-foot building w/ Studio MLA net-zero building is complete!
Location: Chestnut Hill, MA
Client/Architect: STACK + CO.
EOR: Structures Workshop
Reference: SW19114
Location: North Easton, MA
Client/Architect: Piatt Associates Architecture
EOR: Structures Workshop
Reference: SW21033
1800 sq feet timber construction, open air unheated pavilion.
Location: Providence, RI
Client/Architect: up architecture
EOR: Structures Workshop
Reference: SW21044
Location: Montauk, NY
Client/Architect: OF/D Oliver Freundlich Design
EOR: Structures Workshop
Reference: SW21206
This project was just featured in the September 21, 2023, New York Times Magazine. Click here for a closer look.
Location: Providence, RI
Client/Architect: UNION STUDIO
EOR: Structures Workshop
Reference: SW17022
Precast plank over bearing masonry walls
Above Ground Vault
Electrical Vault
Construction Documents for Union Westminster
2022 Preservation Award Winner
Here is the team who worked on the project accepting the award.
Project description in the 2022 Preservation Awards addendum
Location: Providence, RI
Fabricator: Capco Steel Erection Company
Reference: SW18118
We designed the cantilevered steel support structure for a future tensile fabric membrane at the Garrahy Parking Garage in Providence. Capco Erection is currently installing the stainless steel pipes for a future tensile fabric covering. For more photos check out our blog posting.
Location: Handover, NH
Fabricator: United Steel
Reference: SW19082
We designed an extra-large 40x40 ft crane tower footing.
Location: Windsor Locks, CT
Fabricator: Shepard Steel Co., Inc.
Reference: SW19222
This is an example of the sketches, dialogue and instructions offered in our calc packages.
Location: North Kingstown, RI
Fabricator: Shepard Steel Co., Inc.
Reference: SW21148
Location: Groton, CT
Fabricator: United Steel
Reference: SW22059
We advised United on the guy wires/erection bracing and erection sequence.
Proposing various options
Location: Providence, RI
Fabricator: Capco Steel Erection Co.
EOR: Odeh (SW did connections only)
Reference: SW21103
Photo credit : Capco Steel Erector FB
Location: Bedford, NH
Client/Architect: Stack + Co
EOR: Structures Workshop
Reference: SW22050
Location: Providence, RI
Client/Architect: Warren Jagger
EOR: Structures Workshop
Reference: SW19070
SAP models help us calculate the maximum deflection caused by snow loads and drifts on a roof.
